Welcome to the bigboi Knowledge Base

Your Source for Expert Advice, Troubleshooting, and Product Information

WashR FLO Maintenance Guide

Table of Contents

  1. Maintenance Steps

Regular maintenance of your Bigboi WashR FLO ensures its longevity and optimal performance. Follow these guidelines to keep your pressure washer in top condition.

Maintenance Steps

  1. Check for Defects

    • Regularly check for obvious defects such as loose fittings, and worn or damaged components.
  2. Inspect Covers and Guards

    • Ensure the covers and guards are undamaged and correctly fitted. Carry out necessary maintenance or repairs before using the washer.
  3. Strainer Use

    • Never use the pressure washer without the strainer or with a damaged strainer.
  4. Transporting the Washer

    • To transport the washer up or down obstacles, lift it by the top handle.
    • If the washer is to be stored or transported horizontally, drain the detergent tank first.
  5. Cleaning the Exterior

    • Clean the exterior of the machine thoroughly using a soft brush or cloth. DO NOT use water, solvents, or polishes. Remove all debris, especially from the ventilation slots.
  6. Cleaning the Nozzles

    • Regularly clean the nozzles to ensure efficient running of the washer. The nozzle must be cleaned at regular intervals with the nozzle cleaner pin as provided.
  7. Servicing and Repairs

    • All pressure washers will eventually require servicing or replacement of parts due to wear from regular use. To ensure that only authorized replacement parts are used, all service and repairs must be performed by Bigboi authorized service centers.

By following these maintenance steps, you ensure your WashR FLO operates efficiently and safely. If you encounter any issues, refer to our troubleshooting guide or contact our support team for assistance.

Updated on 24 Jun 2024